FeaturesWatch it workEstimating & BoQHow it worksSolutionsPricingCertificationContestAbout & teamFounderFAQResourcesContact

Everything between plan and price.

The tools an estimator reaches for, in one place.

Measure on the drawing

Lengths, areas and counts, taken straight from PDF and CAD drawings, scans and photos.

Scale and units

Calibrate each page. Work in metres, centimetres, millimetres or feet and inches.

Levels and pages

Assign drawings to floors and move between pages without losing your place.

Bill of quantities

Every measurement flows into a BoQ you can review line by line.

Rate build-ups

Build rates from resources, so prices stay traceable.

Overhead and profit

Apply OH&P once and see the total update.

Three steps. No spreadsheet first.

Start from the drawing and let the quantities follow.

1

Open a drawing

Load your plan as a PDF, CAD drawing, scan or photo and move between pages.

2

Set the scale

Calibrate against a known dimension, in metres, millimetres or feet and inches.

3

Measure and price

Take off lengths, areas and counts, then review them in a bill of quantities with rates and OH&P.

What you can measure.

Four kinds of measurement cover almost every item in a bill of quantities.

MeasurementTypical itemsUnit
LengthPipe and cable runs, skirting, kerbs, beam lengths, rebar runsm
AreaFloors, walls, ceilings, roofs, plaster, paint, formwork, waterproofingm²
VolumeConcrete, excavation, fill (worked out from length, width and depth)m³
CountDoors, windows, sockets, lights, fixtures, pilesnumber

Steel is reported by weight in tonnes. See the rebar weight chart.

Works with the drawings you already have.

Open the file you were given. No redrawing and no special format.

  • PDF drawings from architects and engineers, including multi-page sets.
  • CAD drawings from your design team.
  • Scans and photos of printed plans, when a digital file is not available.

Scanned and photographed plans are only as accurate as the picture. Always set the scale from a dimension printed on the drawing and check it against a second one. See how to set the scale.

Units and conversions.

Work in the units your drawings use. These are the conversions behind them.

FromToMultiply by
1 inchmillimetres25.4
1 footmetres0.3048
1 m²square feet10.764
1 m³cubic yards1.308
1 tonnekilograms1,000

Want to feel it first?

Ready to try it? Get the free beta from the Microsoft Store, then request access and we switch it on for you.

Locked in the beta

This feature is part of the full TapeLine experience.