Home › How it works
Three steps. No spreadsheet first.
Start from the drawing and let the quantities follow. This is the workflow, with the checks that keep the numbers right.
1. Open a drawing
Load your plan as a PDF, CAD drawing, scan or photo and move between pages.
- Use the latest revision. A quantity taken from an old revision is a common source of error.
- Start with the plan that shows the most: usually the floor plan of the lowest level.
- Keep the section and elevation handy for heights and thicknesses.
2. Set the scale
Click two points of a known distance and enter its length. Then check the result against a second dimension on the same page.
| Scale | 10 mm on paper is |
|---|---|
| 1:50 | 0.5 m |
| 1:100 | 1 m |
| 1:200 | 2 m |
Pages in the same file can have different scales, so set each page on its own. Read more in how to set the scale on a drawing.
3. Measure and price
Take off lengths, areas and counts, then review them in the bill of quantities with rates and overhead and profit.
- Length for runs and perimeters, area for surfaces, count for items.
- Work level by level and in a fixed order. See the take-off checklist.
- Every measurement flows into a line of the bill, so you can see where each number came from.
Checks before you price
- Is the scale confirmed against two dimensions?
- Were openings deducted once, and the same net area used for plaster, paint and blocks?
- Does the total look reasonable against past jobs, for example steel kg per m³ of concrete?
- Are the assumptions, such as slab thickness read from a section, written down?
What you end up with
A set of measured quantities tied to the drawing, grouped into a bill of quantities with rates, overhead and profit and a total. Change a measurement and the bill updates.
Related guides.
Read more about take-off and estimating.
BoQ format and a worked sample ›
Layout, columns and a filled-in bill of quantities.
Take-off from PDF drawings ›
Scale, measuring and checking on PDF and CAD plans.
Take-off software buyer’s guide ›
What to check before you choose a tool.
Estimate cost from drawings ›
From quantities to rates, overhead, profit and contingency.
What is quantity take-off? ›
The method, step by step.
Rebar weight chart ›
kg per metre and metres per tonne.