How the estimate is built.
Every number in the BoQ comes from the model, with the assumptions shown.
Concrete
Volume = length × width × depth for every pile, cap, beam, slab and column.
Formwork
The surface concrete touches while it sets: sides of beams, columns and caps, and the underside of suspended slabs. Piles are cast in the ground, so they carry none.
Reinforcement
Concrete volume × an assumed steel density per member (below), reported in tonnes.
Rates and OH&P
Sample rates in AED, editable in the BoQ. Overhead and profit are added to the subtotal.
Model data, ready to read.
Every figure below is computed from the same demo model shown on the home page.
Plan your take-off time.
A quick what-if with your own numbers.
Worked example: a simple slab
Quantity take-off turns measurements into the numbers a price is built on. For a slab 10 m long, 8 m wide and 0.2 m thick:
- Concrete volume = 10 × 8 × 0.2 = 16 m³
- Formwork to the soffit = 10 × 8 = 80 m²; edge formwork = 2 × (10 + 8) × 0.2 = 7.2 m²
- Reinforcement at an illustrative 110 kg/m³ = 16 × 110 = 1,760 kg = 1.76 t
Multiply each quantity by your own rate, then add preliminaries, overhead and profit and contingency. The figures above are an illustration, not a price. See how to estimate cost from drawings, concrete volume and formwork and the BoQ format and sample.
Want to feel it first?
Ready to try it? Get the free beta from the Microsoft Store, then request access and we switch it on for you.